null

MOST OF OUR UNIQUE ITEMS ARE ORDERED IN ESPECIALLY FOR YOU

THERE CAN BE UP TO A 2 WEEK WAIT FOR SOME ITEMS TO ARRIVE FROM OUR SUPPLIERS. THEY ARE LOCATED ALL OVER THE WORLD

COILOVER KIT STREET BMW 1 SERIES / E82 COUPE

$1,450.00
(0) Write a Review
SKU:
MTSGWBM12

Product Description

PRODUCT DESCRIPTION
 

Coilover Kit BMW 1 Series / E82 Coupe

Coilover Kit MTS Technik for BMW 1 Series / E82 Coupe, lowering the front axle between 20 - 55 mm, and rear between 30 - 65 mm. Dedicated for the years of: 10/07 - 11/13, for the engine version: 120i / 125i / 135i / M / 118d / 120d / 123d.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
BMW
Model
1 Series / E82 Coupe
Type
E82
Engine
120i / 125i / 135i / M / 118d / 120d / 123d
Year
10/07 - 11/13
 
TECH SPECS:
Series: street
Max. Axle Load FA:
-945 kg
Max. Axle Load RA:
-1070 kg
Lowering FA:
20 - 55 mm
Lowering RA:
30 - 65 mm
Camber / top mount FA:
no
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (60 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (84 N/mm)
TUV Certificate:
yes
Download information brochure: Download information brochure
Download installation manual: Download installation manual
Download TUV Certificate: Download TUV Certificate
 
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
7 - If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
25 - In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
35 - Rear thread adjustment block is mounted on the top.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.