null

MOST OF OUR UNIQUE ITEMS ARE ORDERED IN ESPECIALLY FOR YOU

THERE CAN BE UP TO A 2 WEEK WAIT FOR SOME ITEMS TO ARRIVE FROM OUR SUPPLIERS. THEY ARE LOCATED ALL OVER THE WORLD

COILOVER KIT STREET AUDI TT 8N COUPE

$1,220.00
(0) Write a Review
SKU:
61590007

Product Description

Coilover Kit Audi TT 8N Coupe

Coilover Kit MTS Technik for Audi TT 8N Coupe, lowering both axles between 25 - 50 mm. Dedicated for the years of: 10/98 - 09/06, for the engine version: 1.8T Quattro / 3.2 Quattro.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
Audi
Model
TT 8N Coupe
Type
8N3
Engine
1.8T Quattro / 3.2 Quattro
Year
10/98 - 09/06
 
TECH SPECS:
Series: street
Max. Axle Load FA:
1050 kg
Max. Axle Load RA:
1080 kg
Lowering FA:
25 - 50 mm
Lowering RA:
25 - 50 mm
TUV Certificate:
no
Download instruction: Download instruction
Download installation manual: Download installation manual
 
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
6 - If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.