Product Description
Coilover Kit Audi A4 B5 Sedan
Coilover Kit MTS Technik for Audi A4 B5 Sedan, lowering the front axle between 40 - 100 mm, and rear between 20 - 80 mm. Dedicated for the years of: 11/94 - 09/01, for the engine version: 1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.CAR:
| Make |
Audi
|
| Model |
A4 B5 Sedan
|
| Type |
8D2
|
| Engine |
1.8 Quattro / 1.8T Quattro / 2.4 Quattro / 2.6 Quattro / S4 Quattro / 2.8 Quattro / 1.9TDI Quattro / 2.5TDI Quattro
|
| Year |
11/94 - 09/01
|
TECH SPECS:
| Series: | sport |
 Max. Axle Load FA: |
1081 - 1150 kg
|
| Max. Axle Load RA: |
1130 kg
|
| Lowering FA: |
40 - 100 mm
|
| Lowering RA: |
20 - 80 mm
|
| Info: |
without RS4 Quattro
|
| TUV Certificate: |
yes
|
| Download instruction: | Download instruction |
| Download installation manual: | Download installation manual |
| Download TUV Certificate: | Download TUV Certificate |
PRODUCT NOTES
2 - Front and rear axle height adjustable (threaded shock absorber housing).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
