Product Description
Coilover Kit BMW 3 Series / E30 Sedan
Coilover Kit MTS Technik for BMW 3 Series / E30 Sedan, lowering the front axle between 25-90 mm, and rear between 10 - 50 mm. Dedicated for the years of: 11/82 - 01/91, for the engine version: 315 / 316 / 316i / 318i / 318is / 320i / 323i / 325i / 325e / 324d / 324td.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
A complete set ready for assembly, also including sway bar links, adapted for lowering.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.CAR:
| Make |
BMW
|
| Model |
3 Series / E30 Sedan
|
| Type |
E30
|
| Engine |
315 / 316 / 316i / 318i / 318is / 320i / 323i / 325i / 325e / 324d / 324td
|
| Year |
11/82 - 01/91
|
TECH SPECS:
| Series: | sport |
 Max. Axle Load FA: |
-865 kg
|
| Max. Axle Load RA: |
-1030 kg
|
| Lowering FA: |
25 - 90 mm
|
| Lowering RA: |
10 - 50 mm
|
| Camber / top mount FA: |
yes
|
| Camber / top mount RA: |
yes
|
| Coilover Main Spring (Front): |
Spring rate (80 N/mm)
|
| Coilover Helper Spring (Front): |
Spring rate (20 N/mm)
|
| Coilover Main Spring (Rear): |
Spring rate (260 N/mm)
|
| Coilover Helper Spring (Rear): |
Spring rate (20 N/mm)
|
| Info: |
strut diameter at the front axle of 45 mm
|
| TUV Certificate: |
no
|
RODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
8 - Not for 4x4.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
26 - Independent height adjustment at the lower brackets on the front dampers.
28 - Set includes 2x upper "camber plates" on the front axle.
29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
33 - Including M-Technik.
35 - Rear thread adjustment block is mounted on the top.
