null

MOST OF OUR UNIQUE ITEMS ARE ORDERED IN ESPECIALLY FOR YOU

THERE CAN BE UP TO A 2 WEEK WAIT FOR SOME ITEMS TO ARRIVE FROM OUR SUPPLIERS. THEY ARE LOCATED ALL OVER THE WORLD

MTS Technik - Coilover Kit Street Volkswagen Golf III

NZD$1,712.75
(0) Write a Review
SKU:
MTSGWVW44

Product Description

Coilover Kit Street Volkswagen Golf III

Coilover Kit Street MTS Technik for Volkswagen Golf III, lowering both axles between 25 - 80 mm. Dedicated for the years of: 01/93 - 07/97, for the engine version: 1.8 Syncro / 2.0 Syncro / 2.9 VR6 Syncro / 1.9TDI Syncro.

2 years warranty 
High quality confirmed by a 2-year warranty without a mileage limit.
 
High quality 
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
 
Twin-tube construction 
The use of twin-tube technology guarantees stable shock absorber performance.
 
Gas technology 
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
 
Specially selected type of thread 
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
 
hexaCOIL adjustable spring perch 
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
 
Anti-corrosion protection yellow galvanized 
Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
 
Eibach springs 
Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
Volkswagen
Model
Golf III
Type
1H1
Engine
1.8 Syncro / 2.0 Syncro / 2.9 VR6 Syncro / 1.9TDI Syncro
Year
01/93 - 07/97
 
TECH SPECS:
Series: street
Max. Axle Load FA:
1035 kg
Max. Axle Load RA:
1060 kg
Lowering FA:
25 - 80 mm
Lowering RA:
25 - 80 mm
TUV Certificate:
yes
Download instruction:    Download instruction
Download installation manual:    Download installation manual
Download TUV Certificate:    Download TUV Certificate
 
PRODUCT NOTES
2 - Front and rear axle height adjustable (threaded shock absorber housing).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.