null

MOST OF OUR UNIQUE ITEMS ARE ORDERED IN ESPECIALLY FOR YOU

THERE CAN BE UP TO A 2 WEEK WAIT FOR SOME ITEMS TO ARRIVE FROM OUR SUPPLIERS. THEY ARE LOCATED ALL OVER THE WORLD

COILOVER KIT SPORT VOLKSWAGEN GOLF III

$1,750.00
(0) Write a Review
SKU:
MTSGWVW86-S

Product Description

Coilover Kit Volkswagen Golf III

Coilover Kit MTS Technik for Volkswagen Golf III, lowering both axles between 25 - 80 mm. Dedicated for the years of: 10/89 - 07/98, for the engine version: 1.8 Syncro / 2.0 Syncro / 2.9 VR6 Syncro / 1.9 TDI Syncro.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
Volkswagen
Model
Golf III
Type
1H1
Engine
1.8 Syncro / 2.0 Syncro / 2.9 VR6 Syncro / 1.9 TDI Syncro
Year
10/89 - 07/98
 
TECH SPECS:
Series: sport
Max. Axle Load FA:
-1035 kg
Max. Axle Load RA:
-1060 kg
Lowering FA:
25 - 80 mm
Lowering RA:
25 - 80 mm
Camber / top mount FA:
yes
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (70 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (70 N/mm)
Coilover Helper Spring (Rear):
Spring rate (20 N/mm)
TUV Certificate:
no

 

PRODUCT NOTES
2 - Front and rear axle height adjustable (threaded shock absorber housing).
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.