null

MOST OF OUR UNIQUE ITEMS ARE ORDERED IN ESPECIALLY FOR YOU

THERE CAN BE UP TO A 2 WEEK WAIT FOR SOME ITEMS TO ARRIVE FROM OUR SUPPLIERS. THEY ARE LOCATED ALL OVER THE WORLD

COILOVER KIT STREET VOLKSWAGEN TIGUAN I With Camber Tops

$1,570.00
(0) Write a Review
SKU:
MTSGWVW104

Product Description

Coilover Kit Volkswagen Tiguan I - With Camber Tops

Coilover Kit MTS Technik for Volkswagen Tiguan I, lowering both axles between 35 - 65 mm. Dedicated for the years of: 09/07 - 07/18, for the engine version: 1.4TSI / 1.4TSI 4motion / 2.0TFSI / 2.0TFSI 4motion / 2.0TSI 4motion / 2.0TDI / 2.0TDI 4motion.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
 
CAR:
Make
Volkswagen
Model
Tiguan I
Type
5N
Engine
1.4TSI / 1.4TSI 4motion / 2.0TFSI / 2.0TFSI 4motion / 2.0TSI 4motion / 2.0TDI / 2.0TDI 4motion
Year
09/07 - 07/18
 
TECH SPECS:
Series: street
Max. Axle Load FA:
-1200 kg
Max. Axle Load RA:
-1170 kg
Lowering FA:
35 - 65 mm
Lowering RA:
35 - 65 mm
Camber / top mount FA:
yes
Camber / top mount RA:
no
Coilover Main Spring (Front):
Spring rate (34 - 40 - 70 N/mm)
Coilover Main Spring (Rear):
Spring rate (43,6 N/mm)
TUV Certificate:
no
Download instruction: Download instruction
Download installation manual: Download installation manual
 
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
17 - Only for vehicles without electronic damping.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35 - Rear thread adjustment block is mounted on the top.
44 - Installation of the rear axle adjustment must be carried out in accordance with the instruction.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.